Common
Sewing Machine troubles
Troubles
|
Causes
|
Remedies
|
1.
Unusual clocking noise
2.
Needle breaks
3.
Uneven stitches
4.
Heavy functioning of the machine
5. Balance wheel does not tum |
·
Dirty machine loose screws accumulated dust in
the shuttle race area.
·
Wrong needle attachment.
·
Needle is bent. Needle is attached on the wrong side.
·
Size of the needle does not match the thickness
of the fabric.
·
Insuficient foot pressure.
·
The needle is attached too low.
·
Belt too tight.
·
The machine needs oiling.
The belt is too lose stop motion screw is loose
|
·
Brush away the dirt loose screws clean the
shuttle race with a brush before oiling.
·
Attack the needle correctly and fighter the
screw.
· Chang the needle correct the position of the
needle.
·
Math the size of the needle with the fabric.
·
Increase pressure on the presser foot by tightening
screw.
·
Raise the needle higher through the needle
clamp tighten the thumb screw.
·
Tighten the belt a cord
·
Oil the machine.
tighten the belt rotate stop motion screw clockwise to tighten. |
No comments:
Post a Comment